Cookies Our website uses cookies. If you are happy for us to do so, just click Close. ->
For full details of the cookies we use and how we use them, or to change your settings please see this page.
This is a shared computer - do not remember this setting after I close my browser
 
 
 
Experts in car diagnostics since 2001
 
  Home Car fault-finding tools Fiat, Alfa Romeo diagnostic tools

MultiECUScan Bluetooth Package (CAN cars only)

MultiECUScan Wireless Bluetooth CAN-only Diagnostic Bundle for some Fiat & Alfa Romeo cars (1 PC)

MultiECUScan Bluetooth Package (CAN cars only)


Product Code: FESCANBT

Product rating: Not yet rated

Review this product


Share this product

Price:
only
£ 134.95
Includes VAT! - FREE delivery!
Availability: In stock In Stock!
Shipped same working day.

£ 134.95
Availability: In Stock! Shipped same working day.

Product details

No CD
Please note - to reduce our use of single-use plastics, we no longer supply the software on CD.

Download links for the software and user manual are included in our printed Quickstart guide, and our online guide.

Advanced fault diagnostics for Fiat & Alfa Romeo cars - * WIRELESS CAN-only Bundle *

The MultiECUScan package supports fault code reading (and clearing) andlive sensor data from controllers such as Engine, Automatic Transmission, Airbag, ABS and Electric Power Steering.

Finally you can look after Fiat-based cars at home or in the workshop without needing to visit the dealer!

This CAN-only package covers the vehicles from Fiat and Alfa Romeo where ALL systems on the car have moved to the CAN protocols:
  • Alfa Romeo 4C (2008-on)
  • Alfa Romeo Giulietta (2010-on)
  • Alfa Romeo MiTo (2008-on)
  • Fiat 500 (2007-on)
  • Fiat 500e
  • Fiat 500L (2007-on)
  • Fiat Bravo (2014-on) - * [TPMS requires additional adaptor] *
  • Fiat Doblo (Type 152 & 263 only)
  • Fiat Ducato (Type 250 FaceLift & 290 only)
  • Fiat Grande Punto (2005-2010)
  • Fiat Panda (2012-on)
  • Fiat Punto Evo (2009-2012)
  • Fiat Punto (2012-on)
  • Fiat Qubo / Fiorino (2007-on)
  • Lancia / Chrysler Delta (2014-on) - * [TPMS requires additional adaptor] *
  • Lancia / Chrysler Ypsilon (2011-on)

** Important - 2018+ model year coverage: **

Please note - some vehicles from the 2018 model year onwards (sold since mid-2017) , will have a "Security GateWay" Module (SGW). The SGW module limits diagnostic communication to read-only access, unless the tool can obtain a session-specific access code from Fiat group's servers (which requires an expensive subscription).

This limitation blocks tools from executing commands on the vehicle (e.g. actuations, procedures and even clearing of DTCs).
However, the current generation of SGW can be bypassed, by unplugging the SGW from the car, and connecting an SGW Bypass Adaptor (available separately) in its place.
Vehicles known to be affected so far include MY2018 500X/Renegade, 500L MCA, Doblo, Giulia/Stelvio.

To see the full coverage of the MultiECUScan software please click here.
This package will support any control module listed as working with "ELM" or "ELM C19".


What features are available?

  • Fault code reading and clearing
  • Live sensor reading display (numerical or graph format)
  • Data Recording
  • Actuator testing on supported modules
  • Reset/Programming functions on supported modules
  • Service Reminder Indicator reset on supported vehicles

What is included in the package?

  • MultiECUScan software licence for full registered version
  • Genuine OBDLink LX Bluetooth Diagnostic Interface
  • Yellow adaptor lead for low-speed CAN connection
    (Referenced by MultiECUScan as 'Adapter 3')
    * Meets the updated MultiECUScan specification for adaptor 3, with the pin 12 connection required for Xenon headlight coverage on some Alfa MiTo and Fiat 500 models*
  • Quickstart setup guide
  • Access to online support forums on MultiECUScan.net

About the OBDLink LX interface

  • Features the STN1155 chip
  • The STN1155 chip supports the full ELM327 command set and an extended command set adding many enhanced features
  • The STN1155 is up to 10 times faster than the ELM327 chip
  • 4 times as much flash memory as ELM327 chip
  • Over 5 times the RAM of the ELM327 chip
  • The STN1155 is Firmware updateable while the ELM327 requires the chip to be replaced with each new version

What do I need to use the package?

  • A laptop or PC running Windows 8.1, 10 or 11 with Bluetooth built-in or a plug-in bluetooth adaptor
    (Windows XP, Vista and Windows 7 may still work, but are no longer supported by Microsoft and so we cannot offer support on them if we suspect the O/S to be the cause of any problems)
  • Microsoft .NET Framework Version 2.0 SP1 or newer. (Free to download from www.microsoft.com if not already installed).
    For Windows 8.1, 10 & 11, Microsoft .NET Framework 3.5 or higher is required. This may not be installed by default.
    To install, go to Control Panel -> Programs and Features -> Turn Windows features on or off, and install .NET Framework 3.5.
  • 1.5GHz CPU or higher
  • 2GB RAM (4GB or higher recommended)

The kit includes all necessary software and leads to connect to the vehicles listed at the top of this page.
(If you require full support of other Fiat group vehicles, look at the full MultiECUScan package).

No need to modify interfaces or mess about with break-out boxes, the included interface and adaptor lead provide connections to the required pins to cover all the modules supported by MultiECUScan on the models listed above.

What about updates?

The software licence entitles you to 12 months of free updates from the date of registration.
At the end of the 12 months, the version currently installed will not time out - you can continue to use it.
If you wish to continue updating the software, just purchase a new software licence for a further 12 months of updates.

Return of product

In the unlikely event that you decide to return the product, we will of course provide a refund, but we regret that we cannot refund the software price if the MultiECUScan software has been registered. We recommend testing your vehicle with the free software version available from MultiECUScan.net and only once satisfied it works correctly, using the Promo code included in the package to register the full version.

IMPORTANT NOTE: The yellow adaptor cable is only intended for use with the MultiECUScan software, on supported Fiat group vehicles, as listed on the MultiECUScan.net Supported Vehicles List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.

Product reviews

No reviews have been submitted for this product yet.

If you've already purchased this product, you can submit the first review here!


 
Review Widget
Want to sign up to our email newsletter? *
Email:
* - We only email about once a week, and will only use your data as outlined in our Privacy Policy
4.9
4.9
377 reviews | Excellent