|
Connect your PC to your
VW, Audi, Seat or Skoda car!
USB
PC diagnostics interface for Volkswagen, Audi, Seat and Skoda models
This
interface is compatible with the VAG-COM
software from Ross Tech LLC release 409.1 or lower, and works with:
- most
1995-2003 VW cars with the 16-pin diagnostic socket
- most
1996-2003 Audi cars with the 16-pin diagnostic socket
- most
Skoda and Seat models to 2003 with the 16-pin diagnostic socket
Using the
VAG-COM software, you can:
- read
and clear fault codes (from most systems within the car, e.g. engine
management, ABS)
- view
live data from the sensors within the car
- view
monitor test status
- and much
more... (see below)
Interface features:
- Includes
automatic support for both single and dual K lines (found
in B6/8E chassis Audi A4 and 2002+ Audi A6) - no manual switching required
- OBD-II
connector made to fit even in the 'tight' diagnostic sockets - found
on cars such as B5 Passats and B5 Audi A4s
- Electronic
protection against over-current conditions (protection against the 'aftermarket
radio problem')
- Status/activity
LED
- Compatible
with VAG-COM Release 409.1 or lower
- Cable
length 1.5m
- Includes
download instructions for software drivers
VAG-COM
software
A
highly useful shareware version of the VAG-COM software can be downloaded
for free. It can also be upgraded to the full version for US$99,
as required.
Please
click
here for a comparison of the shareware and full versions of the
VAG-COM software.
Please
note: This
interface is not supplied with VAG-Com software and you will need to download
the VAG-COM 409.1 software to use this interface. VAG-Com version 409.1
is not compatible with Windows Vista. If you are running Windows Vista
you will need to purchase an official VAG-Com interface with the latest
version of the VAG-Com software.
This
interface is not associated with or endorsed by Ross Tech LLC. VAG-COM
is a trademark of Ross Tech LLC.
|
In Stock!
