FiatECUScan Airbag, ABS, P/S & CAN Adaptor Cables

Adaptor cables for FiatECUScan software

These are special break-out adaptor cables specifically designed for use with the FiatECUScan software package, to offer additional systems coverage (Airbag, ABS and Power Steering systems) on vehicles where communications are required through different pins on the diagnostic connector.
See the Supported Vehicles list on the FiatECUScan website for coverage details.

Using these adaptor cables removes the need to modify your own interface cables with soldered connections that may prevent them from being used with other vehicles.

What is included in the package?

• 'Green' adaptor lead (FiatECUScan 'Adapter 1') - to allow ABS and Power Steering diagnostics.
  This lead has a green connector on one end for easy identification.
  - Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pins 1, 7, 9 & 12 on the car end of the adaptor.
  
  
• 'Red' adaptor lead (FiatECUScan 'Adapter 2') to allow Airbag diagnostics.
  This lead has a red connector on one end for easy identification.
  - Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pin 3 only on the car end of the adaptor.
  
  
• 'Yellow' adaptor lead (FiatECUScan 'Adapter 3') - to allow low speed CAN diagnostics (Fiat 500 etc).
  This lead has a yellow connector on one end for easy identification.
  - Pin 6 on the diagnostic tool end of the adaptor is electrically connected to pin 1 on the car end of the adaptor.
  - Pin 14 on the diagnostic tool end of the adaptor is electrically connected to pin 9 on the car end of the adaptor.
  - Pin 7 on the diagnostic tool end of the adaptor is electrically connected to pin 12 on the car end of the adaptor.
  ** This cable meets the updated FiatECUScan specification for adaptor 3, with the pin 12 connection required for Xenon headlight coverage on CAN cars **
  
  
• Please note this bundle does NOT include any diagnostic interface cables - this is just the break-out adaptors.
  If you require the ELM327 and KKL interfaces too, they are available with these adaptor cables in a hardware-only bundle here, or a full licensed bundle here.

What do I need to use these adaptors?

- FiatECUScan software (free or licensed version)
- ELM327 v1.3 (or higher) and/or KKL (VAG-COM) cable
- A laptop or PC running Windows XP, Vista or Windows 7 with a USB port
- Microsoft .NET Framework Version 2.0 SP1. Free to download from www.microsoft.com if not already installed on your computer
- 1.5GHz CPU or higher

IMPORTANT NOTE: These adaptor cables are only intended for use with the FiatECUScan software, on supported Fiat group vehicles, as listed on the FiatECUScan.net Supported Vehicles List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.