MultiECUScan Package (Fast-CAN cars only)
MultiECUScan Fast-CAN-only Diagnostic Bundle for some Fiat, Alfa Romeo and Chrysler cars (Single PC)
|
|
Product Code: FESCAN2
Product rating:
Not yet rated
Review this product
Share this product
|
Includes VAT! -
FREE delivery!
Availability:
In Stock! Shipped same working day.
£
116.50
Availability:
In Stock! Shipped same working day.
|
Product details
Please note - to reduce our use of single-use plastics, we no longer supply the software on CD.
Download links for the software, user manual and USB drivers are included in our printed Quickstart guide, and our online guide.
Advanced fault diagnostics for Fiat & Alfa Romeo cars - * High-Speed CAN-only
Bundle *
The MultiECUScan package supports fault code reading (and clearing) and live sensor data from controllers
such as
Engine, Automatic Transmission, Airbag, ABS and Electric Power Steering.
Finally you can look after Fiat-based cars at home or in the workshop without needing to visit the dealer!
This Fast-CAN-only package covers the vehicles from Fiat, Alfa Romeo, Chrysler, Dodge and Jeep where ALL
systems on the car have moved to the
standard CAN, MS-CAN / BHCAN, and High-Speed CAN protocols:
- Alfa Romeo Giulia
- Alfa Romeo Stelvio
- Chrysler Thema
- Dodge Journey
- Dodge Neon (2016-on)
- Fiat 500X
- Fiat Argo
- Fiat Egea
- Fiat Freemont
- Fiat Tipo (2015-on)
- Fiat Toro
- Fiat Uno (2015-on)
- Jeep Cherokee (2015-on)
- Jeep Compass (2016-on)
- Jeep Renegade
Not sure if your vehicle is supported? Try our MultiECUScan Package
Chooser.
** Important - 2018+ model year coverage: **
Please note - most vehicles which are compatible with this package, and are a 2018 model year (sold since
mid-2017) or newer, will have a " Security GateWay" Module ( SGW).
The SGW module limits diagnostic communication to read-only access, unless the tool can obtain a session-specific
access code from Fiat group's servers (which requires an expensive subscription).
This limitation blocks tools from executing commands on the vehicle (e.g. actuations, procedures
and even clearing of DTCs).
However, the current generation of SGW can be bypassed, by unplugging the SGW from the car, and connecting an
SGW Bypass Adaptor in its place.
To see the full coverage of the MultiECUScan software
please click
here.
This package will support any control module listed as working with "ELM", "ELM A5" or "ELM A6".
What features are available?
- Fault code reading and clearing
- Live sensor reading display (numerical or graph format)
- Data Recording
- Actuator testing on supported modules
- Reset/Programming functions on supported modules
- Service Reminder Indicator reset on supported vehicles
What is included in the package?
- MultiECUScan software licence for full registered version
- Genuine OBDLink SX USB Diagnostic Interface
-
Blue adaptor lead for MS-CAN / BHCAN connection
(Referenced by MultiECUScan as 'Adapter 5')
-
Grey adaptor lead for High-Speed CAN connection
(Referenced by MultiECUScan as 'Adapter 6')
- Quickstart setup guide
- Access to online support forums on MultiECUScan.net
About the OBDLink SX interface
- Features the new STN1110 chip
- The STN1110 chip supports the full ELM327 command set and an extended command set adding many enhanced
features
- The STN1110 is up to 10 times faster than the ELM327 chip
- 4 times as much flash memory as ELM327 chip
- Over 5 times the RAM of the ELM327 chip
- The STN1110 is Firmware updateable while the ELM327 requires the chip to be replaced with each new version
What do I need to use the package?
-
A laptop or PC running Windows 10 or 11 with a USB port
(Windows XP, Vista, 7 and 8.1 may still work, but are no longer supported by Microsoft and so we cannot
offer support on them if we suspect the O/S to be the cause of any problems)
-
Microsoft .NET Framework Version 2.0 SP1 or newer. (Free to download from www.microsoft.com if not already
installed).
For Windows 8.1, 10 & 11, Microsoft .NET Framework 3.5 or higher is required. This may not be installed by
default.
To install, go to Control Panel -> Programs and Features -> Turn Windows features on or off, and
install .NET Framework 3.5.
- 1.5GHz CPU or higher
- 2GB RAM (4GB or higher recommended)
The kit includes all necessary software and leads to connect to the vehicles listed at the top of this
page.
(If you require full support of other Fiat group vehicles, look at the full
MultiECUScan package).
No need to modify interfaces or mess about with break-out boxes, the included interface and adaptor lead
provide connections to the
required pins to cover all the modules supported by MultiECUScan on the models listed above.
What about updates?
The software licence entitles you to 12 months of free updates from the date of registration.
At the end of the 12 months, the version currently installed will not time out - you can continue to use
it.
If you wish to continue updating the software, just purchase a new software
licence
for a further 12 months of updates.
Return of product
In the unlikely event that you decide to return the product, we will of course provide a refund, but we regret
that we
cannot refund the software price if the MultiECUScan software has been registered. We recommend testing your
vehicle
with the free software version available from MultiECUScan.net and only once satisfied it works correctly,
using the
Promo code included in the package to register the full version.
IMPORTANT NOTE: The blue and grey adaptor cables are only intended for use with the MultiECUScan software, on
supported
Fiat group vehicles, as listed on the MultiECUScan.net
Supported Vehicles
List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.
|
Product reviews
No reviews have been submitted for this product yet.
If you've already purchased this product, you can submit the first review here!
|