MultiECUScan Diagnostic Package (Bluetooth)
MultiECUScan Wireless Diagnostic Package for Fiat / Alfa Romeo / Lancia cars (Single PC)
|
|
|
Product Code: FESPKGBT
Product rating:
Not yet rated
Review this product
Share this product
|
Includes VAT! -
FREE delivery!
Availability:
In Stock!
Shipped same working day.
£
129.95
Availability:
In Stock! Shipped same working day.
|
Product details
Please note - to reduce our use of single-use plastics, we no longer supply the software on CD.
Download links for the software and user manual drivers are included in our printed Quickstart guide, and our online guide.
Advanced wireless fault diagnostics for Fiat & Alfa Romeo cars
Our MultiECUScan Bluetooth package supports fault code reading (and clearing) and live sensor data from controllers such as
Engine, Automatic Transmission, Airbag, ABS and Electric Power Steering.
Finally you can look after Fiat-based cars at home or in the workshop without needing to visit the dealer!
Coverage includes most 2005 or newer petrol and diesel models (cars must use entirely CAN-based diagnostic systems to be compatible with this package
- you can check coverage for your car here).
** Important - 2018+ model year coverage: **
Please note - some vehicles from the 2018 model year onwards (sold since mid-2017), will have a
" Security GateWay" Module ( SGW).
The SGW module limits diagnostic communication to read-only access, unless the tool can obtain a session-specific
access code from Fiat group's servers (which requires an expensive subscription).
This limitation blocks tools from executing commands on the vehicle (e.g. actuations, procedures
and even clearing of DTCs).
However, the current generation of SGW can be bypassed, by unplugging the SGW from the car, and connecting an
SGW Bypass Adaptor (available separately) in its place.
Vehicles known to be affected so far include MY2018 500X/Renegade, 500L MCA, Doblo, Giulia/Stelvio.
Please click here for MultiECUScan's full car coverage list.
(This wireless version of the package supports all systems with 'ELM' listed against them, but does NOT systems which only list 'KL')
What features are available?
- Fault code reading and clearing
- Live sensor reading display (numerical or graph format)
- Data Recording
- Actuator testing on supported modules
- Reset/Programming functions on supported modules
- Service Reminder Indicator reset on supported vehicles
What is included in the package?
- MultiECUScan software licence for full registered version - valid for use on a single PC
- Genuine Vgate vLinker MC+ Bluetooth Diagnostic Interface (faster than ELM327)
- Green adaptor lead to allow ABS and Power Steering diagnostics
(Referenced by MultiECUScan as 'Adapter 1')
- Red adaptor lead to allow Airbag diagnostics
(Referenced by MultiECUScan as 'Adapter 2')
- Yellow adaptor lead for low-speed CAN connection
(Referenced by MultiECUScan as 'Adapter 3')
- Purple adaptor lead to allow electric hood diagnostics
(Referenced by MultiECUScan as 'Adapter 4')
- Blue adaptor lead for MS-CAN / BHCAN connection
(Referenced by MultiECUScan as 'Adapter 5')
- Grey adaptor lead for high-speed CAN connection
(Referenced by MultiECUScan as 'Adapter 6')
- Quickstart setup guide
- Access to online support forums on MultiECUScan.net
What do I need to use the package?
-
A laptop or PC running Windows 10 or Windows 11
(Windows XP, Vista, 7 and 8.1 may still work, but are no longer supported by Microsoft and so we cannot offer support
on them if we suspect the O/S to be the cause of any problems)
-
Bluetooth adaptor with support for Bluetooth 4.0 or higher
-
Microsoft .NET Framework Version 2.0 SP1 or newer. (Free to download from www.microsoft.com if not already installed).
For Windows 8.1, 10 & 11, Microsoft .NET Framework 3.5 or higher is required. This may not be installed by default.
To install, go to Control Panel -> Programs and Features -> Turn Windows features on or off, and install .NET Framework 3.5.
- 1.5GHz CPU or higher
- 2GB RAM (4GB or higher recommended)
The kit includes all necessary software and leads to connect to a (CAN-based) Fiat or Alfa Romeo car
fitted with a 16-pin diagnostic connector.
No need to modify interfaces or mess-about with break-out boxes, the included adapter leads
provide connections to the required pins to cover the various systems and CAN buses on the vehicles.
What about updates?
The software licence entitles you to 12 months of free updates from the date of registration.
At the end of the 12 months, the version currently installed will not time out - you can continue to use it.
If you wish to continue updating the software, just purchase a new software licence for a further 12 months of updates.
Return of product
In the unlikely event that you decide to return the product, we will of course provide a refund, but we regret that we
cannot refund the software price if the MultiECUScan software has been registered. We recommend testing your vehicle
with the free software version available from MultiECUScan.net and only once satisfied it works correctly, using the
Promo code included in the package to register the full version.
IMPORTANT NOTE: These adaptor cables are only intended for use with the MultiECUScan software, on supported Fiat
group vehicles, as listed on the MultiECUScan.net
Supported Vehicles List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.
|
Product reviews
No reviews have been submitted for this product yet.
If you've already purchased this product, you can submit the first review here!
|
