Cookies Our website uses cookies. If you are happy for us to do so, just click Close. -> Close
For full details of the cookies we use and how we use them, or to change your settings please see this page.
This is a shared computer - do not remember this setting after I close my browser

Gendan Automotive Products
Experts in car diagnostics since 2001
Home Car Tools & Accessories Motorbike Tools Vehicle Parts Tech Info About Us Fault Codes
Coronavirus / COVID-19 Service Updates
Home > Oxygen lambda sensors & Ignition coil packs > Direct-fit oxygen sensors
Review a product you have purchased, and you may win an NT200!

Ford Planar Oxygen Sensor

4-wire Planar Sensor for some Ford engines

 Ford Planar Oxygen Sensor

Product Code: LB1604

Share this product

Price: only £ 49.94

Includes VAT! - FREE delivery!

Availability: Awaiting stock On order.
Expected to ship in 3 working days.
Email me when back in stock Email me when in stock

Product details

This is a direct-fit 4-wire Planar oxygen sensor.

Compatible with some Ford Ka and Fiesta models (see compatible vehicles page).

This sensor has the correct electrical connector fitted for use with compatible vehicles (no soldering required).


  • 4-wire Planar Oxygen / Lambda Sensor
  • Direct Fit - no soldering required
  • Total length (including wire) = 394mm
  • See compatible vehicles section for known applications

Compatible vehicles

Important note: Ford have published a Technical Service Bulletin - TSB 67/2006 - regarding a fault on many vehicles which use this sensor.
A problem with the software on the engine ECU causes the heater circuit on the sensor to over-heat, which may cause the sensor to fail prematurely, often with one or more of the following fault codes: P0030, P0031, P0032, P0053, P0130, P0131, P0132, P0133, P0134.

The fault affects:
- Ford Ka 1.3 8v Duratec, built between 14/10/2002 and 21/12/2006
- Ford Ka 1.6 8v Duratec, built between 14/10/2002 and 21/12/2006
- Ford StreetKa 1.6 8v Duratec, built between 01/2003 and 07/2005
- Ford Fiesta 1.3 8v Duratec, built between 30/11/2001 and 07/12/2006

If your car is one of those listed above, please contact Ford to ensure that the fix for TSB 67/2006 has been applied to the car - this involves updating the ECU software with a new version that recalibrates the sensor heater.

If sensors purchased from us are used on the above cars, we can only honour the warranty if you can supply proof that the car has had the TSB 67/2006 fix applied before fitting.

This product is compatible with the following vehicles:


Engine Code



Fiesta 1.25i 16v 75bhp ZH12
9/2000 to 12/2002
Fiesta 1.25i 16v 75bhp
(Post Catalytic Convertor)
Sensor with grey round plug 9/2000 to 12/2002
Fiesta 1.3i 8v 67bhp Duratec EFi
3/2002 to 7/2003
Fiesta 1.3i 8v 70bhp Duratec EFi
8/2003 to 1/2004
Ka 1.3i 8v 60bhp Endura E
OE sensor has grey round plug 10/2000 to 10/2002
Ka 1.3i 8v 70bhp Duratec
10/2002 to 9/2008
Ka 1.6i 8v 94bhp Zetec
5/2003 to 9/2008
StreetKa 1.6i 8v 94bhp Zetec
2/2003 to 8/2005
121 1.2i 16v 75bhp ZH12
3/1996 onward
Want to sign up to our email newsletter? *
* - We only email about once a week, and will only use your data as outlined in our Privacy Policy