This tool comes with free software updates for 18 months from the date of purchase.
To apply software updates to the tool you will need a Windows PC/Laptop and an SD Card Reader
If we have sufficient time between your order being placed and being shipped, we will often install the latest available updates for you
on the day the order
Registration part 1 - Create an account
You firstly need to create an account with Foxwell and register your tool.
This can be done through the FoxScanner update software, which can be downloaded for free from the Foxwell UK website.
Just select your tool from the list on the Foxwell UK Updates page
follow the instructions to download the latest version of FoxScanner.
The file downloaded will be a compressed zip file. Open that file and run the installer inside it.
The installer will sometimes try to install FoxScanner to the D:\ drive. In most cases you will need to change this to C:\
Once installed, open the FoxScanner software.
Click the Register button and complete the registration page to create your Foxwell account.
Registration part 2 - Add your tool to the account
To register the tool, you will need the tool's Serial Number and 'Register Password'.
You can find these on the tool by selecting Setup > About
When logged into FoxScanner, click the 'Register Products' icon.
On the 'S/N Registration' tab, put a tick in the box marked '001' then select your tool in the Part Number column.
Enter the product's serial number and password, then click Submit.
A confirmation box should be shown confirming successful registration.
Updating your tool
Now close the FoxScanner software, remove the SD card from your tool (making sure the tool is turned off first!) and connect it to the PC via
an SD card reader
Due to the expanding coverage of the NT644, to install all available updates you will need a Kingston or Sandisk branded
16GB SD Card
Tools supplied before October 2016 will have been supplied with a 4GB or 8GB card.
So long as you are still within your 18 month update period you can run the update procedure listed below with a new, blank Kingston or Sandisk 16GB card.
We recommend re-formatting new 16GB SD cards to the FAT32 file system, with an "Allocation unit size" of 4096 bytes before applying the software updates.
Once Windows has detected the SD card, run the FoxScanner software and login again. click the 'My Updates' button.
After a few seconds, a list of the available software updates will appear.
Ensure that the correct serial number is displayed in the drop-down list.
Click the Update button to download and install available updates.
the update process can take a long time. If your tool has not been updated recently, it may take a few hours for the update
process to complete. Once the update has completed, don't forget to 'safely remove' the SD card in Windows before unplugging it, to avoid
the possibility of data corruption.
Once your initial 18 months of free updates expire, the tool will continue to function - it will not 'time out' - but you will no longer
be able to access the update server.
Should you wish to continue updating your tool, you will need to purchase an update package
will give you a further 18 months of access to the update servers.